55.5cm Bill Holland Vintage American Steel Road Bike Frame Set

✓ Original vintage frame - built in the 1980s/90s
✓ Lightweight for the era - just 2.8 kg
✓ Thoroughly checked over & photographed in detail
✓ Worldwide shipping

Trained by the legendary Albert Eisentraut, Bill Holland has been building high end steel, titanium and lately carbon frames from San Diego for nearly 50 years. Dedicating himself to building steel frames for his first 20 years, he produced quality over quantity and his frames are few and far between, especially outside of the USA. Bill began to experiment with titanium in the mid 90s and exclusively built with the material until the mid 2010s when he started to offer full custom carbon frames built by hand.

A rare find on this side of the pond, this exquisite road frame combines the expertise of two Californian legends; Bill Holland and Joe Bell. Probably from the late 80s or early 90s it sports minimal, intricate lug-work, shot-in seatstays and seamless fully sloping fork crown resulting in a sleek look. The original Joe Bell two-tone paintwork is amongst the best in the business, neon pink contrasting with a bluey-purple finish that includes the painted-to-match Silca frame pump.

The frame's been carefully checked by one of our mechanics to confirm the alignment's correct and there's no damage to the threads. If there are any minor issues worth noting we will do so in the overview section below. Please take a good look at the detailed photos so you can see the cosmetic condition of the frame before you buy.

OVERVIEW


Era - 1980s/1990s
Country - American
Frame Material - Steel
Weight - 2.835 kg
Stock Code - U-F-R99V

NB - Includes painted to match Silca pump

SIZING


Size Guide* - Medium (Approx 32 1/2" Inside Leg)
Seat Tube (ctc) - 55.5 cm
Top Tube (ctc) - 55 cm
Head Tube - 134 mm
Chainstay Length - 40.5 cm
Wheelbase - 96.5 cm

*This is just a guide, not a guarantee the frame will fit as every rider is different. If you're unsure of your size we'd always recommend trying out a bike with similar frame dimensions first.

TECHNICAL INFO


Rear Spacing - 126 mm
Front Spacing - 100 mm
Seatpost Diameter - 27.2 mm
Wheel Size - 700c/28"
Brake Fixing - Recessed Allen Key
Front Brake Drop - 46 mm
Rear Brake Drop - 42 mm
Bottom Bracket Thread - English/British/ISO Thread
Headset Thread - Standard ISO (24 TPI - British/Italian)
Headset Stack Height - 34 mm
Fork Crown Race - 26.4 mm (ISO)
Shifter Fittings - Downtube Braze-On
Headtube Internal Diameter - 30.2 mm
Steerer Internal Diameter - 22.2 mm (Standard)

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

We don't charge VAT, however, if buying from outside of the UK please remember that there may be import fees to pay directly to the delivery company before receiving the order. Unfortunately we can’t advise on the exact costs as it varies from country to country, so please check your national rates before purchasing.

HELP SECTION

Seat Tube (ctc) - we measure from the centre of the bottom bracket shell up to the centre line of the top tube to give a consistent measurement regardless of frame design (ctc means centre to centre).

Top Tube (ctc) - this is measured from the centre of the head tube to the centre of the seat tube, along the centre of the top tube.

Chainstay Length - measured from the centre of the bottom bracket shell to the centre point of the rear dropout.

Wheelbase - measured from the centre of the front fork dropout to the centre point of the rear dropout.

Front & Rear Spacing - measured from the inside of one dropout to the other. The dropouts on steel frames can be stretched or squeezed a few mm but it's always best to avoid this if possible, aluminium or carbon frames should never be stretched.

Brake Drop - measured using wheels of the relevant size for the frame, as stated in the technical info section.

Headset Threads - although it's generally recommended to match threaded parts exactly, with headsets you can technically mix and match, unless you have French or the obscure old Raleigh threads, in which case you need to stick to that type.